Barnett B, Townley LR, Post V, Evans RE, Hunt RJ, Peeters L, Richardson S, Werner AD, Knapton A and Boronkay A (2012) Australian groundwater modelling guidelines. Waterlines Report No. 82. National Water Commission, Canberra. Viewed 22 June 2016, http://nwc.gov.au/__data/assets/pdf_file/0016/22840/Waterlines-82-Australian-groundwater-modelling-guidelines.pdf.
Beaumont MA, Zhang W and Balding DJ (2002) Approximate Bayesian computation in population genetics. Genetics 162, 2025–2035.
Brunner P, Simmons CT, Cook PG and Therrien R (2010) Modeling surface water-groundwater interaction with MODFLOW: some considerations. Ground Water 48, 174–180.
Crosbie R, Peeters L and Carey H (2016) Groundwater modelling. Submethodology M07 from the Bioregional Assessment Technical Programme. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. http://data.bioregionalassessments.gov.au/submethodology/M07.
Davis CJ (2002) Statistics and data analysis in geology. Third edition. Wiley, New York.
Delleur JW (2007) The handbook of groundwater engineering. CRC Press, Boca Raton.
Doig A and Stanmore P (2012) The Clarence‑Moreton Basin in New South Wales; geology, stratigraphy and coal seam characteristics. Eastern Australasian Basins Symposium IV.
Doble R, McCallum J, Turnadge C, Peeters L J, Wu B and Mallants D (2016, in press) Modelling inter-aquifer leakage associated with well integrity failure. Commonwealth Scientific and Industrial Research Organisation (CSIRO), Canberra.
Herckenrath D, Doherty J and Panday S (2015) Incorporating the effect of gas in modelling the impact of CBM extraction on regional groundwater systems. Journal of Hydrology 523, 587–601.
Ingram ET and Robinson VA (1996) Petroleum prospectivity of the Clarence-Moreton Basin in New South Wales. New South Wales Department of Mineral Resources, Petroleum Bulletin 3.
Mann CJ (1993) Uncertainty in geology. In: Davis JC and Herzfeld UC (eds) Computers in geology – 25 years of progress. Oxford University Press, Oxford. pp. 241–254.
Moore CR, Doherty J, Howell S and Erriah L (2015) Some challenges posed by coal bed methane regional assessment modeling. Groundwater 53, 737–747.
NSW DPI (2012) NSW aquifer interference policy: NSW Government policy for the licensing and assessment of aquifer interference activities. NSW Department of Primary Industries. Viewed 22 December 2015, http://www.nsw.gov.au/sites/default/files/nsw-aquifer-interference-policy_sd_v01.pdf.
Parsons Brinckerhoff (2013) Preliminary numerical groundwater modelling report. Prepared for Metgasco Limited, Document No: 2193251B-WAT-PRE-001 RevA, dated 16 December 2013.
Peeters L, Pagendam D, Gao L, Hosack G, Jiang W and Henderson B (2016) Propagating uncertainty through models. Submethodology M09 from the Bioregional Assessment Technical Programme. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia. Australia. http://data.bioregionalassessments.gov.au/submethodology/M09.
Raiber M, White PA, Daughney CJ, Tschritter C, Davidso P and Bainbridge SE (2012) Three-dimensional geological modeling and multivariate statistical analysis of water chemistry data to analyse and visualise aquifer structure and groundwater composition in the Wairau Plain, Marlborough District, New Zealand. Journal of Hydrology 436–437, 13–34.
Raiber M, Cui T, Rassam D, Pagendam D and Hodgen M (2016a) Observations analysis, statistical analysis and interpolation for the Clarence-Moreton bioregion. Product 2.1-2.2 from the Clarence-Moreton Bioregional Assessment. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. http://data.bioregionalassessments.gov.au/product/CLM/CLM/2.1-2.2.
Raiber M, Murray J, Bruce C, Rassam D, Ebner B, Henderson B, O’Grady T, Gilfedder M and Cui T (2016b) Conceptual modelling for the Clarence-Moreton bioregion. Product 2.3 from the Clarence-Moreton Bioregional Assessment. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. http://data.bioregionalassessments.gov.au/product/CLM/CLM/2.3.
Rassam D, Raiber M, McJannet D, Janardhanan S, Murray J, Gilfedder M, Cui T, Matveev V, Doody T, Hodgen M and Ahmad ME (2014) Context statement for the Clarence-Moreton bioregion. Product 1.1 from the Clarence-Moreton Bioregional Assessment. Department of the Environment, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. Viewed 12 August 2016, http://data.bioregionalassessments.gov.au/product/CLM/CLM/1.1.
Renard P and de Marsily G (1997) Calculating equivalent permeability: a review. Advances in Water Resources 20, 253–278.
Rojas R, Feyen L and Dassargues A (2008) Conceptual model uncertainty in groundwater modeling: combining generalized likelihood uncertainty estimation and Bayesian model averaging. Water Resources Research 44, W12418.
Reilly TE, Franke OL and Bennet GD (1987) The principle of superposition and its application in groundwater hydraulics. U.S. Geological Survey, Techniques of Water-Resources Investigations, Book 3, Chapter B6.
Vrugt JA and Sadegh M (2013) Toward diagnostic model calibration and evaluation: approximate Bayesian computation. Water Resources Research 49, 4335–4345.
Wellmann FJ, Horowitz FG, Schill E and Regenauer-Lieb K (2010) Towards incorporating uncertainty of structural data in 3D geological inversion. Tectonophysics 490(3–4), 141–151.
Product Finalisation date
- 184.108.40.206 Methods
- 220.127.116.11 Review of existing models
- 18.104.22.168 Model development
- 22.214.171.124 Boundary and initial conditions
- 126.96.36.199 Implementation of the coal resource development pathway
- 188.8.131.52 Parameterisation
- 184.108.40.206 Observations and predictions
- 220.127.116.11 Uncertainty analysis
- 18.104.22.168 Limitations and conclusions
- Contributors to the Technical Programme
- About this technical product